Name: ViewSonic XG2703-GS
Brand: ViewSonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Additional Software Installation (Optional)

1. Load the ViewSonic CD on your CD/DVD drive.

2. Double click on the "Software" folder and choose an application, if desired.

3. Double click on the Setup.exe file and follow the onscreen instructions to

complete the simple installation.

Wall Mounting (Optional)

NOTE: For use only with UL Listed Wall Mount Bracket.

To obtain a wall-mounting kit or height adjustment base, contact ViewSonic

your local dealer. Refer to the instructions that come with the base mounting kit. To

convert your LCD display from a desk-mounted to a wall-mounted display, do the

following:

4. Verify that the power button is turned Off, then disconnect the power cord.

5. Lay the LCD display face down on a towel or blanket.

6. Remove the base. (Screws removal might be required.)

7. Find and identify one of the following VESA mount interfaces (a,b,c) located on

the back of your display (refer to “Specifications” page for your displays mounting

interface). Attach the mounting bracket from the VESA compatible wall mounting

kit using screws of the appropriate length.

a. b. c.

75mm

100mm

200mm

8. Attach the LCD display to the wall, following the instructions in the wall-mounting

kit.

Questions and Answers:

Need help?

Do you have a question about the ViewSonic XG2703-GS and is the answer not in the manual?

ViewSonic XG2703-GS Specifications

General