This monitor features a power management system to “power down” upon receipt of the VESA
DPMS(The display power management signaling) from a VESA DPMS video card.
The VESA DPMS-compliant video card performs this signaling system through not sending
horizontal, vertical, or sync signal.
This monitor enters an appropriate mode through identifying each of the three modes of the
signaling system.
POWER CONSUMPTION
LED INDICATOR
The power management feature of the monitor is comprised of four stages:
On(Green), Standby, Suspend, Active off(Red on/off 1 sec) and Unsupported mode(Green).
Screen blanks after preset idle time
And some electronic circuits or all
Circuitry in the monitor shut down.
Normal operation but the on screen
Display will show error massage
14 ……………………………………………………………………. INSTRUCTION MANUAL
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com