Power Connectors
External 12V Power Connector
The board can be powered with a 12~19V DC external power supply through the 12~19V
DC connector on the back panel. The back panel connector accepts plugs with an inner
diameter of 5.5mm and an outer diameter of 7.5mm.
Figure 7: Back Panel
NOTE:
Note: DC power in can be within 12-19V (>=120W) with this motherboard. The back
panel DC connector is compatible with a 7.4 mm/OD (outer diameter) and 5.1 mm/ID
(inner diameter) plug, where the inner contact is +19 (±10%) V DC and the shell is GND.
The maximum current rating is 12 A.
To Next Page
Loading...