4.7.3 CPU Core Ratio [Auto]
Allows you to set the CPU core ratio automatically or manually.
[Auto] Sets all CPU Core Ratio to IntelĀ® CPU default settings automatically.
[Sync All Cores] Allows you to set CPU Core Ratio settings for all cores.
[Per Core] Allows you to set CPU Core Ratio individually.
The following two items appear only when you set the CPU Core Ratio to [Sync All Cores] or [Per Core].
1-Core Ratio Limit [Auto]
Allows you to set the 1-Core Ratio Limit. Select [Auto] to apply the CPU default Turbo Ratio setting
or manually assign a 1-Core Ratio Limit value that is higher than or equal to the 2-Core Ratio Limit.
2-Core Ratio Limit [Auto]
This item becomes configurable only when you set CPU Core Ratio to [Per Core] and allows you
to set the 2-Core Ratio Limit. Select [Auto] to apply the CPU default Turbo Ratio setting or
manually assign a 2-Core Ratio Limit value that is higher than or equal to the 3-Core Ratio Limit. 1-
Core Limit must not be set to [Auto].
3-Core Ratio Limit [Auto]
This item becomes configurable only when you set CPU Core Ratio to [Per Core] and allows you
to set the 3-Core Ratio Limit. Select [Auto] to apply the CPU default Turbo Ratio setting or
manually assign a 3-Core Ratio Limit value that is higher than or equal to the 4-Core Ratio Limit. 1-
Core/2-Core Ratio Limit must not be set to [Auto].
4-Core Ratio Limit [Auto]
This item becomes configurable only when you set CPU Core Ratio to [Per Core] and allows you
to set the 4 Core Ratio Limit. Select [Auto] to apply the CPU default Turbo Ratio setting or
manually assign a 4-Core Ratio Limit value that is higher than or equal to the 3-Core Ratio Limit. 1-
Core/2-Core/3-Core Limit must not be set to [Auto].
4.7.4 Min CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible minimum value.
Configuration options: [Auto] [1] ~ [30].
4.7.5 Max CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible maximum value.
Configuration options: [Auto] [1] ~ [30].
4.7.6 CPU bus speed : DRAM speed ratio mode [Auto]
Allows you to set the BCLK frequency to DRAM frequency ratio.
[Auto] DRAM frequency is set to the optimized settings.
[100:133] The BCLK frequency to DRAM frequency ratio is set to 100:133.
[100:100] The BCLK frequency to DRAM frequency ratio is set to 100:100.
4.7.7 Memory Frequency [Auto]
Allows you to set the memory operating frequency. Configuration options: [DDR3-800MHz][DDR3-
1066MHz][DDR3-1333MHz][DDR3-1600MHz][DDR3-1866MHz][DDR3-2133MHz]~[DDR3-3200MHz]
4.7.8 CPU Graphics Max. Ratio [Auto]
Allows you to set the CPU Graphics maximum ratio. The maximum ratio is 60x. Use
<+>/<-> to adjust the value.
To Next Page
Loading...