To Next PageTo Next Page
Need help?Do you have a question about the VIGOUR derby plus and is the answer not in the manual?
Installation must be done by licensed professionals.
Follow all relevant local, national, and international standards.
Ensure equal water pressure for hot and cold water lines.
Install and store only in frost-proof locations.
The product comes with a 5-year warranty.
Hold hand under spout for 3 seconds until water flows.
Remove hand or object from the sensor area.
Water flows, LED flashes red twice per second.
Wait for 10 seconds.
Avoid placing hands or objects in the sensor area.
The faucet is now ready for operation.
Press the touch control.
LED indicates red light or flashes.
LED indicates orange light or flashes.
The sensor moves along with the spout.
The mechanical swivel range is limited to 300 degrees.
The sensor's range follows the spout's movement.
Press touch control for at least 2 seconds.
LED flashes orange once.
Press the touch control twice.
LED flashes red with a pulsating pattern.
LED flashes red once every second.
Operate the lever to start water flow.
Turn the spout counterclockwise to the sink edge.
Press the touch control once.
LED flashes orange once.
Turn the spout clockwise to the sink edge.
Press the touch control once.
LED flashes orange once.
Initial setup procedure for the electronic faucet.
Adjusting the electronic function's swivel range.
Activating the temporary off or cleaning mode.
Stopping or pausing the temporary off function.
Activating the continuous water flow mode.
Stopping the continuous water flow.
Setting waterflow duration and hygiene flush parameters.
Activating or deactivating the automatic hygiene flush.
Resetting electronics and calibrating the sensor.
Setting the sensor's detection range.
Indication for an empty battery and related actions.
Notes on suitable cleaning agents, materials, and exclusions.
Guidelines on cleaning dosage, methods, and rinsing.
Warnings regarding residues and damaged surfaces.
Specifies battery type and voltage.
Specifies mains voltage and power consumption.
Defines the acceptable operating pressure range.
Indicates the standard flow rate at a given pressure.
Specifies the maximum allowable water temperature.
Defines the duration water continues to flow after sensor deactivation.
Configuration options for automatic flushing intervals.
Identifies causes and solutions for no water flow.
Addresses faucets flushing without user interaction.
Solutions for water continuously flowing.
Causes and fixes for a dripping faucet.
Explains the meaning of a flashing red LED.
General| Brand | VIGOUR |
|---|---|
| Model | derby plus |
| Category | Plumbing Product |
| Language | English |
