23
DOOR PANEL INSTALLATION
Panels must not weigh more than 50 pounds per door. Refer to “Custom Panel Dimensions” on page 21 for detailed
panel instructions.
Refrigerator Door
1. Remove cabinet side trim with a phillips screwdriver.
2. Remove handle-side door trim with a phillips screwdriver.
3. Install “Z” brackets (see page 24 for details).
4. Align panel in door trim and push evenly. For smoother installation, apply liquid soap to door trim and “Z”
brackets.
5. Install handle-side door trim with screws. Install door trim inserts (supplied) on all four sides of door by starting in
one corner and pushing the strip in place.
6. Install cabinet side trim
Freezer Door
1. Remove handle-side door trim with a phillips screwdriver.
2. Install “Z” brackets (see page 24 for details).
3. Align panel in door trim and push evenly. For smoother installation, apply liquid soap to door trim and “Z” brackets.
4. Install handle-side door trim with screws. Install door trim inserts (supplied) on all four sides of door by starting in
one corner and pushing the strip in place.
To Next Page
Loading...
