Viking Security Safe VS-12BL - IMPORTANT - READ FIRST; GENERAL DESCRIPTION; Safe Components Overview

www.vikingsecuritysafe.com | Help@VikingSecuritySafe.com
• When putting batteries in or replacing it MAKE SURE your safe is in LOCKED position.
• Remember to register NEW PIN, or else anyone can open your safe with Default PIN.
• In default mode fingerprint function is disabled. To activate it register at least one fingerprint.
• Remember to register the same fingerprint in multiple positions.
• You cannot remove only one set of fingerprints. You must Reset your safe and set it up again.
• When Reset to factory default mode, only Default PIN or Key can open the safe.
• When low battery is shown " ", replace with new batteries. All registered fingerprints and PIN will
be SAVED.
• Sounds can be turned ON/OFF, except Warning Beep. (*Warning Beep is disabled if the safe is unlock
with Key).
• Multiple use of incorrect PIN or fingerprint will put your safe On HOLD for 2 minutes.
• When on HOLD only the Key can unlock your safe.
• Do NOT store the Keys to your safe inside the safe.
DISCLAIMER: Most all fingerprint biometric readers loose accuracy and become inconsistent due to worn
out, damaged or thinning skin associated with aging.
DISCLAIMER: Functionality and Set Up of Viking safes may vary between batches. Check Viking's website
for latest User's Manual and tips.
VIKING
Fingerprint
Lock
2
5
8
0
1
4
7
*
3
6
9
#
D
B
E
A
F
G
H
C
L
KJ
I
VIKING SECURITY SAFE
USER'S MANUAL
GENERAL DESCRIPTION
page 2/6
IMPORTANT
-
READ FIRST
TEST ALL FUNCTIONS OF YOUR SAFE. THEN BOLT IT DOWN TO A PERMANENT
LOCATION.
A
Fingerprint Registration/Reset Button
B
Battery Compartment
C
Locking Bars
D
LED light
E
Motorized Door
F
Fingerprint Reader
G
LCD display
H
Battery Indicator
I
Keypad
J
Fingerprint Activation Button
K
Confirm Button
L
Logo Plate and Key Access
#
*
• If you used Key to UNLOCK your safe, use Key to Lock it. If you USED PIN or
Fingerprint, LOCK it electronically with # button.
• When the Key is used to UNLOCK your safe ALL electronic functions are disabled,
thus locking with # button will not work.
• If you used Key to UNLOCK your safe the Key cannot be removed in UNLOCKED
position. Lock your safe with key and remove key. (For more information see TIPS
AND TROBLESHOOTING)
11-16-2021