OPERATION INSTRUCTIONS
It is very important to make sure that the spa is filled up to the proper
level (note the water level mark on the skimmer face) before operating
spa. Make sure the gate valves are in the open or up position.
WARNING: Do not run spa with gate valves closed or run pump with
no water circulating in spa for long periods. Damage could occur to
the spa equipment.
NOTE: The Viking I, Viking II, Aurora I and Eclipse models are
110v/220v systems. The Aurora II, Aurora III, Supreme, Royale,
Royale ETS, Legacy I, Legacy II, Heritage I & Heritage II models are
220v only systems.
9
To Next Page
Loading...
Need help?
General
