Swim Spa Control Panel
Jets
Almost all of the jets in your swim spa are adjustable.
Rotating the face of an adjustable jet to the left will
decrease the amount of water flow through the jet.
Rotating the face of an adjustable jet to the right will
increase the amount of water flow through the jet. (See
example shown here.) Neck jets adjust in the opposite
directions .
LED Lighting
Press the LIGHT button on the topside control panel to turn the swim spa light on. If your
swim spa has perimeter LED lights, they will also light up at the same time as the swim spa
light. The LEDs operate in three modes:
1. Cycle: When you continually press the LIGHT button, the LEDs will cycle through the three
main LED colors (Red, Green, and Blue) or combinations of the three that produce the
following colors: light green, purple, light blue, yellow, etc.
2. Flashing: When you are cycling through all the colors, the next time you push the LIGHT
button, the LED lights may start flashing. This is another normal operational pattern option.
3. Fading cycle: The next phase of operation when you push the LIGHT button is a slow
and/or fast fade random transition from one color to the next.
Swim Spas with exterior LED lighting generally work in the same mode as described above.
The variations in color and patterns provide you with multiple options to suit almost any
lighting preference.
3
To Next Page
Loading...
