Vacation Care
You can leave your swim spa unattended for up to two weeks if you follow these instructions.
ALWAYS lock your cover using the cover locks if you plan to be away from home and the
swim spa is filled with water.
1. Select the Low Range temp choice used for vacation mode.
2. Following the water quality instructions starting on page 21, adjust the pH.
3. Shock the water (add either chlorine or bromine sanitizer).
4. When you return, check and adjust the pH and shock the water.
If you will not be using your swim spa for longer than 14 days and a swim spa maintenance
service is not available, we strongly recommend you drain or winterize your swim spa.
Cleaning Your Swim Spa
Swim Spa Cover and Pillows
Due to the constant punishment your swim spa cover and pillows receive, you should
protect them by applying a vinyl and leather cleaner as part of your monthly maintenance
plan. Use a product that is specifically designed to protect swim spa covers and pillows from
chemical and ultraviolet light damage without leaving an oily residue behind that is normally
associated with common automotive vinyl protectants.
Warning: Do not use automotive vinyl protectants on swim spa covers or pillows. These
products are generally oil-based and will cause severe water clarity issues that are difficult
to correct.
Swim Spa Shell
Each time you drain your swim spa, before you refill it you should clean your swim spa shell
with an all-purpose cleaner and apply a coat of surface protectant. Use a low detergent,
non-abrasive cleaner specifically formulated to clean the swim spa without damaging its
acrylic finish. Use a non-oil-based surface protectant that is specifically formulated to
protect the swim spa’s finish from the chemicals and minerals associated with normal swim
spa use.
4
To Next Page
Loading...
