Using the Bluetooth Sound System
The sound system is ready to pair when it is not already connected to another device. To pair
your device , first make sure you are close enough to the system, and that it is turned on.
1. Open the Bluetooth settings on your device. The location of the settings will depend on
the device you are using.
2. In these settings, turn Bluetooth on, if it is not already.
3. Choose "BBA swim spa Music" from the list of available devices.
4. When prompted, enter 6000 as the password. Your device should now be paired with the
system , and ready to use.
Once the pairing is done and connection has been established between the devices, the
system will be ready to start playing the selected audio. If the device moves out of range and
loses connection it should reconnect automatically as soon as it is close enough. This
should happen without going through the menu again.
5
To Next Page
Loading...
