Pump turns off
during operation
Pump has a
burning smell
while running
Pump does not run
Automatic timer may have completed its cycle. Press JETS or
JETS 1 button to start the cycle again.
Pump may have overheated due to the vents on the equipment
door being blocked. Make sure the front of the swim spa is not
blocked to allow air flow.
The pump motor may be defective. Contact your dealer for
assistance.
A burning smell may be a sign of damage. Contact your dealer
for service.
Pump may have over heated. Let it cool for an hour and try
operating the swim spa for a shorter time.
Power to the swim spa may be shut off. Turn on or reset the
GFCI circuit breaker. If this does not solve the problem,
contact your dealer or a qualified swim spa technician.
6
To Next Page
Loading...
