83
DEFRNLITESPT EN
0478 193 9901 A - EN
Turning the steering wheel (1) to the left L
or right R changes the driving direction of
the machine.
The further the steering wheel (1) is
turned, the smaller the turning radius.
8.6 Driver's seat adjustment lever
The seat can be adjusted to
seven notched positions.
● Stop the engine. (Ö 11.3)
● Sit on the driver's seat.
● Put one hand on the steering wheel.
With the other hand, lift and hold driver's
seat adjustment lever (1).
Move seat (2) to the desired position and
then release driver's seat adjustment lever
again.
Ensure that the driver's seat adjustment
lever fully engages in the selected position
when released.
8.7 Drive pedal
The driving speed can be
continuously regulated via the
drive pedal.
Stopping:
Take foot off the drive pedal (self-
propulsion) (1).
Reducing the driving speed:
Reduce pressure on the drive
pedal (1).
Increasing driving speed:
Press down drive pedal (1).
8.8 Brake pedal
The machine can be braked when driving
and can be blocked at a standstill via the
brake pedal.
Press brake pedal (1).
The more firmly brake pedal (1) is pressed,
the more the rear wheels are braked.
Note
Before actuating the drive pedal,
ensure that the correct driving
direction is selected at the driving
direction selector lever.
If the parking brake is engaged or
the brake pedal is pressed, the
drive pedal cannot be actuated.
Warning:
Never operate the machine with a
defective brake.
Always have a defective brake
repaired or adjusted by a specialist
dealer.
VIKING recommends VIKING
specialist dealers.
Never try to service the brakes
yourself.
To Next Page
