93
DEFRNLITESPT EN
0478 193 9901 A - EN
Attaching the grass catcher box
Position grass catcher box (2) on both
snap-in hooks (3) on the rear panel.
● Actuate and hold the grass catcher box
release lever. (Ö 8.12)
Raise the grass catcher box (2) to the stop.
● Release the grass catcher box release
lever and ensure that the grass catcher
box engages. (Ö 8.12)
11.10 Pulling loads
Maximum trailer weight on a level surface
= 250 kg
Maximum trailer weight on a maximum 10°
inclination = 100 kg
If the machine is operated without
the grass catcher box or deflector
(not included in standard
equipment), the mowing deck
cannot be engaged and
the engine stops automatically.
Risk of injury:
Before pulling or transporting loads
using the machine, the section "For
your safety" and especially the
subsection "Pulling loads" must be
carefully read and observed.
Before attaching loads, always
check the braking function. (Ö 4.)
The driving characteristics of the
machine are changed when
transporting loads (longer braking
distances, select lower driving
speed when changing direction
etc.). The heavier the load, the
more the driving characteristics are
changed.
Avoid damage to the machine.
The maximum pulled load is
decreased on inclines.
To Next Page
