31
Flooding or Ice in Bucket or Freezer
Problem Action
Thermostat out of calibration Replace Ice Maker
Jammed cube stalled in water-fill cycle Remove cube. Determine reason for stall
Leaky water valve Replace water valve
Excessive water fill volume Replace water valve
Motor stalled in water-fill cycle Replace Ice Maker
(12:00 ejection position)
Contaminated module Replace Ice Maker
Refrigerator or ice maker not level Level refrigerator or ice maker
Excessive water pressure Decrease water pressure (20-120 psi (1.4-8.2 bar)
Shorted and burned module shut-off Replace Ice Maker
switch and contacts.
Broken locking tab on vertical cam Replace Ice Maker
(stalled in water fill)
Fill tube not properly positioned in fill cup Reposition fill tube
Fill cup water opening blocked Replace fill cup
Cubes fall over back of ice maker, Replace fill cup
melting in freezer.