How to fix temperature display that does not match set point on Viking Refrigerator?
If the temperature display on your Viking Refrigerator doesn't match the set point, it may be because the unit was just plugged in, hot food was recently added, or the door was opened for an extended time or frequently. Allow the unit to stabilize for 24 hours.
What to do if my Viking Refrigerator ice maker will not operate or ice is not made fast enough?
If the ice maker in your Viking Refrigerator isn't working or is slow, make sure the ice function is on and give the freezer enough time (overnight) to reach the correct temperature. Check that the signal arm is in the down position, the water valve is on, and water is reaching the valve. Also, inspect the water line for any leaks.
Why Viking Dishwasher leaves dishes wet?
If dishes are not dry after a cycle in your Viking Dishwasher, consider these points: * Ensure dishes are placed so water doesn't accumulate in them. * Check and add rinse aid if needed, or increase the rinse aid setting. * Avoid unloading immediately after the program ends; slightly open the door and wait for the steam to evacuate, then allow the dishes to cool before unloading, starting from the lower basket. * Select a program with a longer duration for better drying. * Avoid washing kitchen utensils with deteriorated surface quality in the dishwasher.
What to do if Viking Dishwasher leaves stains on dishes?
If you notice stains on dishes after a cycle in your Viking Dishwasher: * Select a program with a higher temperature and cycle time. * Avoid washing kitchen utensils with deteriorated surface quality in the dishwasher. * If using powder detergent, store it in a closed container in a non-humid place or consider using tablet detergents.
How to prevent lime traces on Viking Dishwasher?
If you see lime traces on dishes or a misty appearance on glassware from your Viking Dishwasher, check the rinse aid indicator and add rinse aid if necessary. You might also need to increase the rinse aid setting.
What to do if Viking Dishwasher has water remaining?
If water remains in your Viking Dishwasher at the end of the program: * Check if the filter system is clean. * Check the discharge hose for blockages. If necessary, remove the hose, clear the blockage, and re-insert it as shown in the user manual.
What to do if the Viking Ranges door will not open?
If the door of your Viking Ranges won't open, the oven may still be in self-clean mode. Wait until the oven is cool so that the door latch releases.
What to do if Viking Ranges oven does not operate in self-clean?
If your Viking Ranges oven isn't self-cleaning, it might be because the door isn't shut tight enough for the automatic door latch to lock. Make sure the door is completely closed.
What to do if Viking Ranges will not function?
If your Viking Ranges will not function, the range may not be connected to electrical power. Have an electrician check the power circuit breaker, wiring, and fuses.
What to do if door will not open on Viking Ranges?
If the oven door on your Viking Ranges won't open, it's possible that the oven is still in self-clean mode. Wait until the oven has cooled down completely, at which point the door latch should release.
General| Control Type | Electronic |
|---|---|
| Self-Cleaning | Yes |
| Color | Stainless Steel |
| Convection | Yes |
| Power Source | Electric |
| Number of Ovens | 1 |
| Width | 36 inches |
| Type | Freestanding |
To Next Page
