What to do if the oven is not clean after self-clean cycle on my Viking VDSC536?
If your Viking Ranges oven isn't clean after the self-clean cycle, ensure the temperature control knob was rotated all the way past 'clean' until it stopped.
How to troubleshoot a Viking Ranges that won't turn on?
If your Viking Range isn't working, the issue might be related to its power supply. Have a qualified electrician inspect the power circuit breaker, wiring, and fuses to ensure they are functioning correctly.
What to do if the oven light is not working in my Viking Ranges?
If the oven light in your Viking Ranges isn't working, start by replacing the bulb, as it may be burned out. If a new bulb doesn't solve the problem, check to ensure that the range is properly connected to a power source.
Why are the igniters sparking but there is no flame on my Viking VDSC536?
If the igniters on your Viking Ranges are sparking but not igniting the flame, check the gas supply valve to ensure it's in the 'ON' position. Also, verify that the gas supply hasn't been interrupted.
Why do the igniters keep sparking after the flame ignites on my Viking VDSC536?
If the igniters on your Viking Ranges continue to spark after the flame has ignited, it could be due to grounding or polarity issues with the power supply. Ensure that the power supply is properly grounded and that the polarity is correct. Also, the igniters might be wet or dirty, so try cleaning them.
General| Width | 36 inches |
|---|---|
| Oven Capacity | 5.0 cu. ft. |
| Number of Burners | 6 |
| Convection | Yes |
| Finish | Stainless Steel |
| Material | Stainless Steel |
| Dimensions (WxDxH) | 36 x 28 x 36 inches |
| Type | Freestanding |
| Ignition Type | Electronic |
| Gas Type | Natural Gas or LP |
| Burners | 6 sealed burners |
To Next Page
