What to do if my Viking Refrigerator is too cold?
If your Viking Refrigerator is too cold, adjust the temperature control to a warmer setting and allow 24 hours for the temperature to stabilize. Also, check the door gasket to ensure it's sealing properly; realign the door or replace the gasket if needed.
Why does the temperature display not match the set point on my Viking Refrigerator?
If the temperature display on your Viking Refrigerator doesn't match the set point, it could be due to several reasons: * The unit was just plugged in. * Hot food was recently added. * The door was opened for an extended time or frequently. Allow the unit to stabilize for 24 hours to resolve this issue.
What to do if the lights do not work in my Viking Refrigerator?
Several factors could be at play if the lights in your Viking Refrigerator aren't working: * A household fuse may have blown, or a circuit breaker may have tripped. * A bulb may be burned out. For models equipped with LED lighting, it's recommended to contact an authorized service agency for assistance.
What to do if the Viking Ranges door will not open after self-clean cycle?
If the oven is still in self-clean mode, the door latch will release once a safe temperature is reached.
What to do if the temperature display does not match the set point on my Viking Refrigerator?
If the temperature display on your Viking Refrigerator doesn't match the set point, especially after just plugging in the unit, adding hot food, or frequently opening the door, allow the unit to stabilize for 24 hours.
Why my Viking VGBQ54224LSS door will not open?
If the door won't open, it's likely because the oven is still in self-clean mode. You'll need to wait until the oven cools down. The door latch will automatically release once a safe temperature is reached.
Why Viking VGBQ54224LSS Ranges oven does not operate in self-clean?
If the oven isn't operating in self-clean mode, it could be that the door isn't shut tight enough. The automatic door latch needs to engage to start the cycle, so ensure the door is firmly closed.
What to do if Viking Ranges oven is not clean after self-clean cycle?
If your oven isn't clean after running the self-clean cycle, make sure that the temperature control knob is rotated all the way past the 'clean' setting until it stops. This ensures the cycle runs correctly.
To Next Page
General
