What to do if my Viking VGRC605 Ranges door locks, fan runs, but no heat?
If the door lock motor is engaged on your Viking Ranges, the cooling fan motor runs, but there is no heat, it could be due to: * The door lock module/timer relay not closing. * A problem with SW3 on the door lock assembly. To fix this, you may need to replace the PC board or SW3.
Safety valve installation for gas supply.
Ensures safe and efficient gas operation.
Diagnosing issues with bake/broil operation.
Troubleshooting bake ignitor not glowing.
Troubleshooting broil ignitor not glowing.
Addressing lack of gas flow or ignition.
Troubleshooting ignition failures.
Correcting flame issues causing soot.
Troubleshooting flashback and torch-like noises.
Diagnosing fan motor issues.
Addressing flames that lift off burner ports.
Addressing gas explosions when shutting off.
Troubleshooting oven light problems.
Diagnosing and fixing lazy flames and odors.
To Next Page
General
