Villeroy & Boch Start ProDetect 2 9190B1 Installation Instructions

Technical data
Flush volume 0.8 / 2 / 3 / 4 l (at 3 bar) Detailed settings via app
(optional)
Hygienic rinse on / off Detailed settings via app
(optional)
Stadium mode on / off Detailed settings via app
(optional)
Base sensitivity low / normal Also via app
Minimum usage duration 9 / 7 / 5 / 3 sec Also via app
Hybrid mode on / off and intervals 1 / 3 /
6 / 12 / 24 / 48 hour
Also via app
Reset to factory settings Also via app
Setting functions:
(Factory setting bold)
Cleaning/block mode (on / off) Only via app
Protection class of electronics IP 64 Dust-tight, protection from
water spray from all directions
Sensor function Detection of urine flow in the urinal
Sensor principle HF Sensor 5.8 GHz
Switching power supply unit
•
Primary: 100-240V, +/- 10%, 50 - 60
Hz
•
Secondary: 12V DC, 1A
Power supply (variants)
Battery 6 x 1.5V alkaline (type AA / LR6)
Service life of battery approx. 3 years / 200,000 flushes
Operating elements 2 buttons
Display elements 1 LED
Interface Digital data interface integrated into
the power supply cable for connecting a
Bluetooth adapter
Diagnosis, setting functions via
smartphone / tablet PC
Flush volume 0.8 / 2 / 3 / 4 l (at 3 bar) Detailed settings via app
(optional)
Hygienic rinse on / off Detailed settings via app
(optional)
Stadium mode on / off Detailed settings via app
(optional)
Base sensitivity low / normal Also via app
Setting functions:
(Factory setting bold)
Minimum usage duration 9 / 7 / 5 / 3 sec Also via app
EN
S. 45

Villeroy & Boch Start ProDetect 2 9190B1 Specifications

General

Brand	Villeroy & Boch
Model	Start ProDetect 2 9190B1
Category	Toilets
Language	English