Villeroy & Boch Start ProDetect 2 9190B1 Installation Instructions

Installation
Attaching the HF sensor
1. Attach the Terostat tape (supplied) to the HF sensor.
The arrow on the HF sensor must point towards the ceramic.
The sensor cable is guided upwards.
2. Depending on which urinal is used, attach the HF sensor to the spot marked on the ceramic, and push firmly.
7.5 Installing the Bluetooth adapter (optional)
Important
Mains model
The Bluetooth adapter can be used only with mains operation.
ProDetect 2 is pre-fitted for the connection of a Bluetooth adapter.
The Bluetooth adapter is permanently installed in the urinal.
S. 54

Villeroy & Boch Start ProDetect 2 9190B1 Specifications

General

Brand	Villeroy & Boch
Model	Start ProDetect 2 9190B1
Category	Toilets
Language	English