20
www.villeroy-boch.com // V 1.0 // 27.04.2018 // V0E100R1
5.4 Setting the nozzle
Set the shower nozzle position by repeatedly pressing the corresponding button.
The LED lights indicate the respectively set shower nozzle position.
Five different levels can be set.
Depending on the level set, the individual LED light moves from left to right or vice versa when the
corresponding button is pressed.
Press the right button to move the shower nozzle forwards.
Press the left button to move the shower nozzle backwards.
The level of the nozzle positions is shown in ascending order from left to right by five adjacent LED
lights. The current level set is indicated by lighting up of one of the LED lights.
Display for rear shower nozzle position.
Display for middle shower nozzle position.
Display for front shower nozzle position.
5.5 Stop
You can stop all wash functions at any time by pressing the stop button.
To Next Page
Loading...
Need help?
General
