11
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
PRECPREV
SUCC.NEXT
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
PRECPREV
SUCC.NEXT
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
PRECPREV
SUCC.NEXT
OK
FINE
END
PANELCHIME
REPETITION
OK
FINE
END
PANEL LOCK BLOCK
OK
FINE
END
CHIMECYCLES
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
PRECPREV
SUCC.NEXT
OK
FINE
END
SLAVEPANELSEARCH
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
OK
FINE
END
HORIZONTALBUS
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5
DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
PRECPREV
SUCC.NEXT
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
PRECPREV
SUCC.NEXT
OK
FINE
END
BUTTONREMAPPING
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
DL1 DL2
DL3 DL4
DL5 DL6
OK
FINE
END
MONITORPACKAGES
ENDOFSEQU.
PRECPREV
PRECPREV
SUCC.NEXT
- ENTRANCE PANEL CHIME REPETITION
Enables the electronic unit for the emission of a sound on behalf of the
electronic unit from which the call is being made (send feedback). Default
value=enabled
-Inparametermodicationmode,presstheSTART SI/YES button to enable,
or STOP NO to disable the function.
Press the END button to continue.
- ENTRANCE PANEL LOCK BLOCK
Activation of the lock block enables control of the lock only when the entrance panel
isincall,conversationorself-startstatus.Defaultvalue=
block disabled
-Inparametermodicationmode,presstheSTART SI/YES button to enable,
or STOP NO to disable the function.
Press the END button to continue.
- CHIME CYCLES
Establishes the number of internal unit chime repetitions when a call is
made from the electronic unit.
Defaultvalue=2times,minimumvalue1,maximumvalue20.
-Inparametermodicationmode,presstheSTART SI/YES to start the cycle
count.Toendthecount,presstheSTOP NO button. During the count, the
LEDsashtoallowcalculationofthenumberofcycles.Eachashcorrespondsto
1 cycle.
Press the END button to continue.
- SLAVE PANEL SEARCH
ThisparametercanbeusedtodisablethesearchforSLAVEelectronicunitsviathe
MASTERelectronicunit,onstartuporafterasystemreset.
Defaultvalue=Yes(disablesearch)
-In parameter modication mode,presstheSTART SI/YES button to disable, or
STOP NO to re-enable the search function. Press the END button to continue.
- HORIZONTAL BUS
Thisparameterallowselectronicunitoperatingmodeselectionwhenitisusedin
parts of the system with a vertical or horizontal Bus.
Defaultvalue=NO(verticalBUS)
-In parameter modication mode,pressthe START SI/YES button to enable, or
STOP NO to disable the function. Press the END button to continue.
Thereareotherparametersthatcannotbemodiedwiththestandardconguration.
Refertotheprogrammingwith950Cor,recommended,withtheSaveProg/EVCom
software.
Inhorizontalmodeitisnotpossibletoconguretheindoorunitswiththeprogram-
mable time switch 950C connected to the entrance panel, but only with SaveProg
orEVCom.
After changing the Horizontal/Verticalmode you must RESET the EEPROM and
press the Reset button RST.
- BUTTON REMAPPING
Enablesuseofabuttontocallanaudio/videodoorentryunitthathasalreadybeen
assigned a different code.
Defaultvalue=allbuttonsareassociatedwithaspecicphysicalcode
-Inparametermodicationmode,presstheSTART SI/YES button to start
remapping.
After pressing the START SI/YES button, press the call button of the entrance
panel to be remapped. A general message will be sent from the entrance
panel to all internal units in standby (not in conversation).
When the note is sent with a timeout of 30 s, press the lock button for the
internalunittobeassociated.Theelectronicunitwillemitalowtonewhen
the process is complete and when the timeout period has elapsed.
Press the OK button to remap other buttons or END to proceed.
Torestoreabuttontodefault(Hardwarevalue),pressSTOP NO and the
button you wish to set to the default value.
Note: during this procedure, if the lock button on the internal unit concerned
is pressed, the entrance panel lock is activated. However, to eliminate this
event,enabletheparameterENTRANCEPANELLOCK.
- MONITOR PACKAGES
Thisparametercan be used to disable data displaywiththeSaveProg/EVCom
software.
Defaultvalue=on
-In parameter modication mode,pressthe START SI/YES button to enable, or
STOP NO to disable the function. Press the END button to continue.