Vimar ELVOX 7559 - Page 16

16
7559 Tab 4.3
If there is no answer to one or more calls from the Reception switchboard, the LED remains permanently lit until stand-by
(if the function was enabled from SaveProg).
The LED stops flashing after the Indoor Station has answered and returned to stand-by or:
– after the ringtone has been reactivated;
– after a self-start;
– making any intercom call
4. Press for a prolonged amount of time to delete the signalling
N.B.: the missed call signal remains also in the case of a power outage.
4