Do you have a question about the Vimar ELVOX TAB 7509 and is the answer not in the manual?
Display | 7-inch LCD |
---|---|
Resolution | 800 x 480 pixels |
Touchscreen | Yes |
Camera | Yes |
Night Vision | Yes |
Operating Temperature | 0°C to +40°C |
Housing Material | Plastic |
Mounting | Wall-mounted |
Connectivity | Wired |
Wiring | 2-wire |
Power Supply | External power supply |
Instructions for mounting the entryphone on a wall or flush-mounting box.
Procedure to assign a unique identification code to the entryphone.
Procedure to associate multiple entryphones with the same call code.
Guide to programming push buttons for intercom or auxiliary functions.
Procedure to reset push buttons to their factory default settings.
Assigning self-start function to a specific entrance panel.
Steps to reset the entire entryphone's programming to factory defaults.
How to select and assign different ringtones for various call types.
Guide to adjusting the ringtone volume across 6 different levels.
Procedure to mute and unmute the entryphone's ringtone.
How to answer calls from entrance panels or intercom devices.
Procedure for initiating calls to other indoor stations.
Using the lock release and self-start functions.
How to call a concierge switchboard from the entryphone.
System for sending signals to a switchboard operator.
Configurable parameters for the alert function.
Special feature for hearing aid wearers (Art. 7509/D).
Diagrams for connecting the electronic chime Art. 860A.
Wiring for mechanical chimes using relay Art. 0170/101.
Diagram for direct wiring of door call buttons.
Wiring for door calls using interface module Art. 6120.
Configuration of bus termination connectors (A, B, C) for line adaptation.
Instructions for using output 1 and setting termination on Art. 692D.
Information on downloading the manual and general installation requirements.
Details on EMC directives, standards, and product conformity.
User information regarding Waste Electrical and Electronic Equipment (WEEE).