To Next PageTo Next Page
Need help?Do you have a question about the Vimar ELVOX TAB 7548 and is the answer not in the manual?
General| Brand | Vimar |
|---|---|
| Model | ELVOX TAB 7548 |
| Category | Intercom System |
| Language | English |
Details compliance with EMC directive standards EN 60065, EN 61000-6-1, EN 61000-6-3, and EN 60118-4.
Information on the disposal of electrical and electronic equipment according to WEEE regulations.
Functions for automatic activation and silencing incoming call ringtones.
Buttons for unlocking the lock and adjusting volume/contrast.
Controls for screen brightness and auxiliary lighting.
Describes conditions indicated by flashing lights (e.g., incoming call, configuration).
Describes conditions indicated by steady lights (e.g., chime excluded, door open).
Configuration options for 100 Ohm and 50 Ohm impedance BUS cables.
Details the BUS line terminals (1, 2) and the local call input (FP).
Covers maximum connection distance and earth reference terminal (M).
Wiring diagrams for in/out and terminal configurations of the indoor station.
Specific wiring diagram for connecting the landing or alert button.
Steps for initial programming, including ID identification and secondary ID setup.
How to program buttons for intercom calls, self-start, and LCD settings.
Selecting chime tunes, adjusting volume, and muting the chime.
Answering calls, managing intercom, and adjusting display/audio settings.
Setting up the alert function and its parameters via SaveProg.
Instructions for updating the device's software using SaveProg.
