Vimar ELVOX 7559 - Device Operation and Configuration; Key Functions and Contexts

9
7559 Tab 4.3
First power up
Perform the device installation (according to the assembly instructions and the installation instructions provided in the
printed instruction sheet supplied) and power it.
The TAB 7559 video entryphone by default has not been identified yet, so the first operation required is to define whether
it is main or secondary
Two icons appear:
Caution: installation must be carried out by qualified persons in compliance with the current regulations regarding the
installation of electrical equipment in the country where the products are installed;
N.B.: If no operations are performed, the display is switched off after about 10 seconds
1. Press any of the programmable keys to activate the display
Main Indoor Station: it is the single Indoor Station receiving the call, or it is the first (master) of a
group with the contemporary call from an Outdoor Station.
Secondary Indoor Station: it is the Indoor Station associated with a master Indoor Station of a group
with the contemporary call from an Outdoor Station.
1