45
7559 Tab 4.3
Programming an actuation (ID and icon)
1. Press to program an actuation
2. Press to select the push button to program
3. Press to confirm
4. Press to select the icon that will represent the actuation in the Actuations menu
5. Press to select the icon
6. Press to confirm
7. Press to select the actuation to be associated
8. Press to confirm
1 32 2 4
65 5 7 8
9. Press to select the actuation among those available. 6 actuations are available by default, the first 4 relays and the
F1 – F2 controls on the last Outdoor Station with which the Indoor Station communicated or was called from.
Other actuations can also be selected via the SaveProg software
10. Press to confirm
11. Press to return to the previous screen
12. The actuation programmed can be displayed
109 9 11
12
To Next Page
Loading...
