49
7559 Tab 4.3
Programming an intercom key - Calling an Indoor Station
1. Press to program an intercom key
2. Press to select a call to an Indoor Station
3. Press to confirm
4. Press a key on the Indoor Station to call that identifies it unequivocally. It is advisable to use a key that controls the
opening of a lock, but you can also use a key that operates a relay or controls one of the F1 or F2 outputs of an
Outdoor Station
5. Press to return to the previous screen
6. The actuation programmed can now be displayed
N.B.: if the Indoor Station that is to be called has a handset, it is advisable to use the lock with the handset replaced
1 32 2
5
6
Indoor Station 4
4
To Next Page
Loading...
