52
7559 Tab 4.3
Assignment of main and secondary ID
This section is used to define whether the video entryphone is Main or Secondary and consequently assigns an ID to
identify it in the system.
The procedure described below is the same whether you select primary or secondary
The Indoor Station starts communicating with the Outdoor Station
1. Press to select whether to identify the Outdoor Station as Main or Secondary
2. Press to confirm
3. Press the key on the Master Outdoor Station you wish to receive the call from
N.B.: this procedure applies to entrance panels with push buttons and may vary depending on the Outdoor Station
used; for outdoor stations with a display and keypad, type in the ID code and confirm with the call button.
21 1
Main Indoor Station: it is the single Indoor Station receiving the call, or it is the first (master) of a
group with the contemporary call from an outdoor station.
Secondary Indoor Station: it is the Indoor Station associated with a master entryphone of a group
with the contemporary call from an outdoor station.
3
To Next Page
Loading...
