Vingtor Stentofon ECPIR-3P - Replacing Manual

Replacing Access Panel ECPIR
Item Number
Item Name
Description
102 3200 030
ECPIR-P
Exigo Access Panel, PTT Button
102 3200 033
ECPIR-3P
Exigo Access Panel, PTT + 3 Buttons
1 Demounting the Old Access Panel
To demount the access panel:
1. Disconnect the access panel from the power supply, microphone, I/O interface and network
cables.
2. Remove the four screws that attach the access panel to the mounting box or console.
3. Lift the access panel out of the mounting box or console.
2 Mounting the New Access Panel
To mount the access panel:
1. Insert the access panel into the mounting box or console.
2. Fasten the access panel to the mounting box or console with the four screws.
3. Reconnect the access panel to the power supply, microphone, I/O interface and network cables.