46
Contents
Previous
Page
First
Page
Next
Page
Previous
View
70.3 Remove mechanism block assembly as detailed at Para 24.
70.4 Remove side cover as detailed at Para 52.3.
70.5 Remove bearing bracket as detailed at Para 52.4 and Para 52.5.
70.6 Unscrew and remove two M4 button head screws (75) and remove brake housing top-pan (74).
70.7 Lift out two cylindrical rollers (73).
70.8 Exercising care not to dislodge remaining two cylindrical rollers (73) on actuator shaft (69)
remove six M5 screw (4) and (5) slackened at Para 70.2 and lift the head away from pan drag unit
asse£mbly (3).
70.9 Withdraw extension shaft-pan brake (115) complete with brake cams (117) and (118).
70.10 The actuator shaft (69) and brake housing body (68) with their associated springs (72), spirol
pins (71), and cylindrical rollers (73) can now be removed from below.
Refit
71 The pan brake actuator shaft (69) is refitted by a reversal of the procedure detailed at Para 70.
To Next Page
Loading...
