16
Lower the elevation tube (5) as far as possible.
Tighten the bottom clamp (18).
Remove the load.
Release the skid clamp (11) and the rubber securing straps (7). Lift the struts clear of the
foot supports.
Use the steering ring to lift the telescopic column vertically until it is clear of the skid assem-
bly, then secure the struts with the retaining strap.
Depress each leg locking plunger on the underside of the skid and fold the legs.
WARNING! The column will be unstable if stood on its base or on the folded
struts.
To Next Page
Loading...
