20
19
• Speed Unit: Set the speed unit, kilometer per hour (KPH) or miles
per hour (MPH).
• G-sensor: The G-sensor measures g-shock forces. The setting from
'Low’ to' High’ determines the amount of force needed to lock the file
from being overwritten by loop-recording. We recommend leaving it
set to 'Low’.
• Date Stamp:
• WiFi:
Imprint the time and date on the recorded video.
enable Wi-Fi quickly. We recommend choosing 5GHz Wi-Fi mode
if you mobile phone support 5GHz Wi-Fi.
Set it On / Off. Press the [ ] button for 3 or 5 seconds to
• GPS Info Stamp: Imprint the GPS information on the recorded
video.
• Camera Model Stamp: Imprint the camera model on the
recorded video.
• Record Audio: Turn the microphone ON / OFF. This can be also
activated by pressing the [ ] button while the camera is
recording.
• Screen Saver: Turn the screen OFF after a set time.
• Boot Delay: The camera will boot seconds later when powered on.
• LED: Turn the LED light ON / OFF.
• Date / Time: System date / time setting.
• Time Zone: Set the current time zone for GPS time and date
calibration.
Note: the time zone must be manually adjusted for daylight savings.
• Language: Display language setting (English, Traditional Chinese,
French, etc).
• Beep Sound:
• Voice Notification:
• Frequency: Frequency adjustment setting to minimize
Turn on / off the voice notification.
Turn all notification sounds ON/OFF.
flickering
and banding in recorded video.
• Image Rotation: Turn the screen upside down.
• Image Mirror:
Reverse the image from left to right.
• Format: The operation will delete all data on the Micro SD card.
Note: Once you format the Micro SD card, all information will be
deleted and cannot be restored. Make sure you back up all important
files before proceeding.
• Format Warning: Set the number of days between format
warnings.
• Default Setting: Restore camera to factory defaults.
• Car Number: Imprint a customized set of 11 digits to the recorded
video. Useful to add license plates or identifying features.
• Custom Text Stamp: Imprint the customize text on the recorded
video.
• Firmware Version: Current firmware version check.
.
System Settings System Settings
To Next Page
Loading...
