16
Light indicator is on or flashing, but there is no image displayed on screen
• Check if the monitor is receiving power.
• Check if the graphics card is installed properly.
• Make sure the power cable is securely connected to the monitor.
• Check cable connectors for curved or damaged pins. Replace cables if needed.
Color shortage (red, green, or blue)
• Check cable connectors for curved or damaged pins. Replace cables if needed.
Color difference (colors are not optimized)
• Adjust RGB color or reset color temperature settings.
Section 12: Specifications
Item Detail
Model Number GNV32CBO
Screen Size 31.5”
Curvature 1500R
Viewing Angle ≥178°(H); ≥178°(V)
Aspect Ratio 16:9
Resolution 1920x1080p
Backlight E-LED
LED Indicator Power on: Blue (solid); Power saving: Blue (ashing)
Typical Brightness 250 cd/m
2
Default Color Temp. 6500
Color Gamut 97% sRGB; 73% NTSC
Contrast Ratio 3,000:1
Dot Pitch 0.36 x 0.36mm
Response Time 6ms (GTG), 3ms with overdrive
Refresh Rate 144Hz (Normal) / 165Hz (Overclock)
Ports DVI x 1, HDMI x 1, DP x 1, Audio output x 1
Power AC 100-240V, 50/60Hz, 1.5A
Power Consumption Typical: 45W; Max: 60W; Off/Sleep mode ≤ 0.5W
OSD Language
English, Español, Русский, Français, 한국, Português,
Deutsch, Türkçe, 日本語, 简体中文, Polski, Italiano,
Nederlands
Usage Temp. 32°F~104°F (Operating), -4°F~ 140°F (Storage), 10-85%
RH (Non-Condensing)
Tilt Angle Forward 5°; Backward 15°
Dimension (With Stand) 28 x 20 x 9.65 in (712.56 x 508.48 x 245.11mm)
Weight 16.5 lbs (Net) / 20 lbs (Gross)
To Next Page
Loading...
Need help?
General
