Event-ID Description
0xEA30 Internal error - Please contact the VIPA Hotline!
0xEA40 Internal error - Please contact the VIPA Hotline!
0xEA41 Internal error - Please contact the VIPA Hotline!
0xEA50 Error - PROFINET configuration
ZInfo1: User slot of the PROFINET I/O controller
ZInfo2: IO-Device-No.
ZInfo3: IO-Device slot
0xEA51 Error - There is no PROFINET IO controller at the configured slot
ZInfo1: User slot of the PROFINET I/O controller
ZInfo2: Recognized ID at the configured slot
0xEA53 Error - PROFINET configuration - There are too many PROFINET IO
devices configured
ZInfo1: Number of configured devices
ZInfo2: Slot
ZInfo3: Maximum possible number of devices
0xEA54 Error - PROFINET IO controller reports multiple parametrization of a
periphery address
ZInfo1: Periphery address
ZInfo2: User slot of the PROFINET I/O controller
ZInfo3: Data width
0xEA61 ... 0xEA63 Internal error - Please contact the VIPA Hotline!
VIPA System 300S CPU Deployment CPU 315-2AG13
VIPA specific diagnostic entries
HB140 | CPU | 315-2AG13 | GB | Rev. 14-40 77
To Next Page
Loading...