Viper 4103XV User Manual

Model 4103XV
Installation Guide
This product is intended for installation by a professional in-
staller only! Any attempt to install this product by any person
other than a trained professional may result in severe damage
to a vehicle’s electrical system and components.
© 2009 Directed Electronics, Vista, CA
N4103V 2009-07

Viper 4103XV Specifications

General

Type	Car Alarm
Channels	4
Remote Start	Yes
Keyless Entry	Yes
Panic Mode	Yes
Shock Sensor	Yes
Two-Way Communication	No
Number of Buttons on Remotes	5
Number of Remotes Included	2
Remote Control	Yes
LCD Display	No
Starter Kill	Yes
Door Lock Control	Yes
Trunk Release	Yes
Valet Mode	Yes
Remote Start Ready	Yes
Compatibility	Most Vehicles
Range	1/4 mile
Remote Range	1/4 Mile
Alarm Features	Shock Sensor
Security Features	Starter Kill

Summary

Critical Safety Warnings

Installation Preparation and Final Checks

Component Locations and Wire Identification

Primary Harness (H1) Wiring Diagram

Details the connections for the main 9-pin harness (H1).

Secure Wire Connection Methods

Neutral Safety Switch Interface

Neutral Safety Switch Testing Procedure

Step-by-step guide to verify the proper operation of the neutral safety switch.

Programming Jumper Configuration

Light Flash Polarity Jumper

Configuration of the jumper to set the light flash output polarity.

Tach Threshold Jumper Setting

Setting the jumper to adjust the tach signal threshold detection.

Virtual Tach Learning Procedure

Tach Signal Learning Process

Remote Control Learn Routine

Operating Settings Learn Routine

Features Menu Overview

Menu 1 Feature Settings

Menu 2 Feature Settings

Detailed Feature Descriptions

Menu 1 Feature Explanations

Menu 2 Feature Explanations

Bitwriter® Configuration Tool

Shutdown Diagnostics Procedure

Safety Check Procedures

Troubleshooting Common Issues

Wiring Quick Reference Guide

Wiring Diagram Details