Need help?Do you have a question about the Viper 3000 and is the answer not in the manual?
General| Model | Viper 3000 |
|---|---|
| Category | Car Alarm |
| Remote Control | Yes |
| Number of Remotes Included | 2 |
| Door Lock Control | Yes |
| Trunk Release | Yes |
| Panic Mode | Yes |
| Valet Mode | Yes |
| Remote Start Ready | Yes |
| Range | 1/4 Mile |
Describes the arming function controlled by pressing a button for one second.
Explains how the control module confirms commands and alarm statuses via the remote.
Details the remote's response when the vehicle is out of communication range.
Explains how to arm the system manually using the remote control.
Describes the automatic arming feature triggered by door closure and ignition off.
Details the procedure for disarming the system using the remote control.
Explains how to disarm the system using the ignition key and Valet button.
Procedure to enter shock sensor adjustment mode, requiring system disarm and specific button presses.
Details how to increase or decrease shock sensor sensitivity and test its response.
Explains the conditions under which shock sensor adjustment mode will automatically exit.
Procedure to restore the shock sensor sensitivity to its factory default setting.
Explains bypass notifications that occur when arming the system with active inputs.
Describes Tamper Alerts and NPC warnings indicated by extra chirps during disarming.
Details how siren chirp patterns audibly report the system's status.
Instructions on how to arm the VRS system before driving or while driving.
Describes the sequence of events and delays when the VRS system is triggered.
Explains how to disarm the VRS system, especially after accidental activation.
To Next Page
