Viper 3000 User Manual

34
© 2005 directed electronics, inc.
table of zones
The zone number is the number of LED flashes used by the
system to identify that input. The standard input assignments
are listed below, along with spaces to write in any optional
sensors or switches you have had installed.
Zone - Number Dealer-Installed
of LED Flashes Description Options
1 Instant trigger - often used
for trunk pinswitches
2 Shock sensor input - a light
impact activates warn away
and a heavier impact activates
full alarm.
3 Door switch trigger
4 Optional sensor inputs for
warn away and full
alarm notification.
5 Ignition trigger
6 Hood trigger
7 Optional sensor inputs for
warn away and full
alarm notification.
➜

Viper 3000 Specifications

General

Model	Viper 3000
Category	Car Alarm
Remote Control	Yes
Number of Remotes Included	2
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Remote Start Ready	Yes
Range	1/4 Mile