Do you have a question about the Viper 3305V and is the answer not in the manual?
Security System Type | 2-Way Security System |
---|---|
Remote Start | Yes |
Remote Confirmation | Yes |
Number of Remotes | 2 |
Shock Sensor | Yes |
Siren | Yes |
Number of Buttons on Remotes | 5 |
LCD Display | Yes |
Starter Kill | Yes |
Door Lock Control | Yes |
Trunk Release | Yes |
Panic Mode | Yes |
Valet Mode | Yes |
Remote Start Ready | Yes |
Compatibility | Most vehicles |
Remote Control | Yes |
Range | Up to 1 Mile |
Explains the function of command and programming buttons on the remote.
Describes the visual display area of the remote control.
Explains the meaning of various icons shown on the remote's LCD.
Details the default button functions for arming, disarming, and channels.
Explains common button presses for arming, disarming, and auxiliary functions.
Details how the remote confirms commands and reports alarm triggers.
How to enable or disable audible and vibration feedback on the remote.
How to manually arm the system using the remote control.
Automatic arming of the system after the vehicle is locked.
Allows selection of active sensors for arming, modifying security levels.
How to disarm the system and understand tamper alerts.
Silences and resets the system without disarming it.
How to disarm the system using the Valet button.
How to activate and stop Panic Mode using the 2-way remote.
How to activate and stop Panic Mode using the 1-way remote.
Steps to enable or disable Valet Mode using the Valet switch.
Steps to enable or disable Valet Mode using the remote control.
Explains how the system prevents false alarms from repeated triggers.
Details how zones are bypassed and how to reset the NPC memory.
Explains bypass notifications heard during arming.
Explains Tamper Alert and NPC active notifications during disarming.
Lists zone numbers, LED flashes, and their corresponding inputs.
Details the anti-carjacking and recovery system.
Allows remote starting of the vehicle and climate control.