6
© 2018 Directed. All rights reserved.
Responder LE 2-Way Remote Control
Feature Description
Internal Antenna Used for transmitting and receiving* information
Command buttons (4)
A U X
Used to perform Arming, Disarming, Auxiliary channel and
Remote Start commands.
Function button
Used to access function levels for commands, configura-
tion menus for programming, Car Selection, and to request
reports, as well as 2-way remote battery voltage.
Confirmation LED’s Each button has an associated LED next to it that is active
during related operations. These LEDs are labeled respec-
tively as: Arm LED, Disarm LED, Remote Start LED, and AUX
LED
Micro-USB Port The USB cable plugs into this port to charge the battery
(located on the remote control side).
* 2-way communication is only applicable to the Responder LE
remote control.
To Next Page
Loading...
