9
© 2018 Directed. All rights reserved.
Remote Control Command table
Level
Button
Basic Com-
mands
x1
LEVEL 1
x1
LEVEL 2
x1
LEVEL 3
x1
LEVEL 4
Arm/Lock
(Panic)
Silent Arm/
Lock
Sensor
Bypass*
Sensor
Silent Mode
Arm*
Full Silent
Mode Arm*
Disarm/Unlock
Silent Disarm
/Unlock
Alarm/System
Valet
Car Finder Start Valet**
Remote Start**
Runtime
Reset**
Timer Start** Smart Start** Defogger**
AUX
AUX/Trunk AUX 1 AUX 2 AUX 3 AUX 4
Advance Level,
Change Car
(Hold 3 sec.),
Enter Program-
ming (Hold 8
sec.)
Temperature
Check
(2-way only)
Runtime
Remaining
(2-way
only)**
Alarm Report
(2-way only)*
+
AUX
Combo Valet
(Both Start and
Alarm/System
Valet)***
* Security commands are available only on systems with alarm features.
** Remote Start commands are available only on systems with remote start
features.
*** Combo Valet commands are available only on select systems.
Fault Condition Alerts
If, when performing a command, a condition exists that does not al-
low activation of an Alarm feature* or Remote Start feature**, a fault
tone plays to alert of the fault condition.
* Alarm feature not available when the system status is incorrect
upon receiving the command. (Example: Sensor bypass com-
mand is received when disarmed).Refer to the notes included
To Next Page
Loading...
