Viper 7857V - Runtime Reset; Temperature Request

13
© 2018 Directed. All rights reserved.
Runtime Reset
Press and release
AUX
AUX
If more time is needed while remote start is active, runtime reset will
reset the runtime counter to the pre-programmed setting. The confirma-
tion LEDs show the runtime and the Remote Start ON tones play to
confirm runtime reset.
Note
Remote Start must be ON to use Runtime Reset.
AUX 1
Press and release AUX
Activates (or if ON, deactivates) the AUX 1 output. The AUX LED and
ON tones or OFF tones play to confirm.
Temperature Request
Press and hold the
AUX
button
Requests the vehicle’s interior temperature, and displays it by illuminat-
ing the confirmation LEDs as indicated in the table below.
LED count Temperature indicated
1 ≤ 31°F
2 32°F – 56°F
3 57°F – 81°F
4 ≥ 82°F
Note: Actual temperature may vary with main unit mounting location.