Visa Electronics LUX - Troubleshooting and Support; Common Operational Issues; Further Assistance

6
7. TROUBLESHOOTING (WHAT TO DO IF…)
If the remote is not functioning correctly, try the following:
7.1 If you have followed the procedures correctly, without success: first check the order of the
buttons to be pressed and do not allow the 15 second time limit to elapse after pressing a
button.
7.2 If after setup, you notice that your device does not respond properly for some to some
functions from the LUX, the code memorized is probably not the correct one: try repeating the
search procedure.
7.3 If when you press a key the 8 LED device keys emits three brief flashes: signal that the
batteries are running out; you must change the batteries
7.4 When you press any button and the device key fails to flash: no function is available for that
button or the batteries could be completely dead or else incorrectly inserted in their
compartment: check that they are inserted the right way around and replace them if
necessary.
7.5 For additional information or to resolve any problem, find further contact information on our
website at www.visaelectronics.com
E D I s.r.l.
Via Grottazzolina, 6 – 00138 Rome - Italy
tel. + 39.06.97614023 - fax + 39.06.45437228
www.visaelectronics.com
E mail: sales@visasrl.it
GB - 771.759