12 of 52
1300 884 987 www.medion.com.au
• Do not start the air supply until the device is correctly in
place on the arm.
• Before attaching the cuff to take a measurement, clean
your arm with a soft cloth soaked with surgical spirit
containing 75% alcohol.
• Protect the device and its accessories against moisture,
water in droplet or spray form and sweat. Avoid dust, heat
and direct sunlight in order to prevent malfunction.
• Make sure you do not knock the device, do not drop it
and do not place objects on top of it.
• Do not fold the cuff and do not store the tube in a kinked
or twisted state because the materials could become
damaged as a result.
• Clean the device with a soft, dry cloth. Never use thinners,
alcohol, benzene or wet wipes to clean the device.
15469_MSN 5004 7183 EN Aldi AUS Content Final REV2.indd 1215469_MSN 5004 7183 EN Aldi AUS Content Final REV2.indd 12 23.09.2014 08:33:3223.09.2014 08:33:32
To Next Page
