VIVA Series - Digital Piano
36
BANK H (BANK SELECT MSB)
The BANK SELECT MSB function allows setting of the value of CC 0
to be sent when the Performance is loaded on the channel/port
assigned to the zone concerned.
The display will show the actual parameter value.
The possible values are:
• OFF: Control Change not sent
• 0-27: Value of CC 0
N.B.: each variation made to this parameter will trigger transmission of the
Bank Select LSB, Bank Select MSB and Program Change messages with the
values currently set, on the MIDI channel assigned to the zone being edited.
BANK L (BANK SELECT LSB)
Similar to the above paragraph.
The BANK SELECT LSB function allows setting of the value of CC 32
to be sent when the Performance is loaded on the channel/port
assigned to the zone concerned.
The display will show the actual parameter value.
The possible values are:
• OFF: Control Change not sent
• 0-27: Value of CC 32
N.B.: each variation made to this parameter will trigger transmission of the
Bank Select LSB, Bank Select MSB and Program Change messages with the
values currently set, on the MIDI channel assigned to the zone being edited.
PRG
The PROGRAM function allows setting of the value of the Program
Change to be sent when the Performance is loaded on the
channel/port assigned to the zone concerned.
• OFF: Program Change not sent
• 1÷128: Value assignable to PRG
To Next Page