VIVA Series - Digital Piano
37
IN MODE
Viva has four configuration modes for the [MIDI IN] port:
OFF: messages incoming on the [MIDI IN] port are not loaded.
SYSTEM: The [MIDI IN] port is used to control the instrument. With
a reception channel present, the messages on this channel will be
interpreted in accordance with the following logic:
a) The note messages will be interpreted as if the notes were really
played on the keyboard (and therefore, with the division of the
layers, which transmit on the out ports and channel assigned to
them)
b) The Program Change data will be interpreted as Program Change.
c) The Control Change data will be sent on the active layer/s.
SOFT-THRU: The MIDI data arriving into the [MIDI IN] port will be
sent to the [MIDI OUT] port without being acquired from the
instrument. The data sent will be sum to the messages generated
from the instrument.
SOUND: The data arriving into the [MIDI IN] port will be sent to the
internal sound generation, that will use all 16 MIDI channels.
EXCLUSION: The data arriving into the [MIDI IN] port will be sent to
the internal sound generation, exception made for channels 1 and 2,
that are used for the instrument active layers.
The [MIDI IN] port configurations are displayed as follows:
ENGLISH
To Next Page