VIVA Series - Digital Piano
38
IN CH
The in channel function defines the MIDI receive channel for Viva.
Once selected the value, the display will show the receive channel
set.
The possible values are 0 to 16.
The selected value is immediately active and saved.
B. DUMP
The BULK DUMP function allows to send to a sequencer the Viva
memory content, from the [MIDI OUT] port, in order to save the
programmed Performances and have an external data backup,
The system recalls the Bulk Dump function showing “bld” on the
display, indicating the build of the file, and proceeds automatically
with the data transmission displaying from “S01” to “S99” (“s” =
send).
Once made, the display show the word “don” =done.
The receive function is automatic, if we send a previously recorded
file to the MIDI IN port.
Viva recognizes automatically the data present on the MIDI IN port,
and starts the receive stopping all other operation: the display
shows three lines and SPLIT key flashes.
Once loaded the configuration, Viva restarts automatically and
activate the new configuration.
If the receive was correct, the SPLIT key flashes.
In case of error, the display shows EEE and the procedure must be
repeated.
To Next Page
Loading...
