To Next PageTo Next Page
Need help?Do you have a question about the Vision Fitness R2250 and is the answer not in the manual?
General| Type | Recumbent Exercise Bike |
|---|---|
| Resistance Type | Magnetic |
| Resistance Levels | 20 |
| Display | LCD |
| Weight Capacity | 300 lbs |
| Seat Adjustment | Fore/Aft |
| Weight | 130 lbs |
| Heart Rate Monitoring | Contact Grips |
| Programs | 12 (Manual, Interval, Fat Burn, Random, Target HR, Constant Watts, Hill, Custom) |
A tool for assembling the fitness bike, featuring a T-shaped handle.
An L-shaped tool with a 4mm hexagonal end for tightening bolts.
A wrench designed for installing and removing pedals, with 17mm and 15mm sizes.
A tool used for driving screws, typically for console mounting.
A hexagonal wrench with a 5mm end, used for specific assembly tasks.
Includes pedals, power supply, water bottle & cage, hardware bags, and assembly guide.
Contains M8 x 15L bolts (Qty: 4), M8 x 10L set screw (Qty: 1), and SW8 lock washers (Qty: 6).
Contains M6 x 55L bolts (Qty: 4), M8 x 20L bolts (Qty: 2), and SW8 lock washers (Qty: 6).
Contains M8 x 70L bolts (Qty: 2), M8 x 25L bolts (Qty: 2), and SW8 lock washers (Qty: 4).
Attaching the rear foot to the frame using M8x25L and M8x70L bolts with lock washers.
Mounting seat frame, handlebars, cushion, and mesh seat back using various bolts.
Connecting the console mast, console, and water bottle cage using hardware.
Attaching the left and right pedals to their respective crank arms.
Selecting product and model configuration on the console after powering on.
