Vision 1624R User Manual

Vision 1624R, 2525 and 2550 Series 5 Installation Guide44
© 2019 Vision Engraving & Routing Systems
2.7 Network Connection
NOTE - This following section is shown on a Windows 10 PC. For Windows 7 or Windows 8, the screens
are slightly different.
Plug the USB end of the USB to Ethernet adapter into any open USB port on the computer.
Right click on the Windows network icon in the lower right corner of the Windows screen.
Select "Open Network & Internet settings".

Vision 1624R Specifications

General

Brand	Vision
Model	1624R
Category	Engraver
Language	English